Cisco Ccna 200-301 Labs Only Don’T Just Be A Paper Cert.


Cisco Ccna 200-301 Labs Only Don’T Just Be A Paper Cert.
Cisco Ccna 200-301 Labs Only Don’T Just Be A Paper Cert.
Published 3/2025
MP4 | Video: h264, 1920×1080 | Audio: AAC, 44.1 KHz

Master All Devices Including Routers/Switches/Access Points/WLC And There Corresponding Protocols And Services.

What you’ll learn

TCP/IP Addressing

What’s The Purpose Of A Router And A Switch and Why Need It.

Setup Basic CLI Including HostName,Passwords,UserName,History Size,Banner,Encrypting Passwords.

Setting Direct and Remote (Telnet,SSH) Connections To Router And Switch.

How To Configure A DHCP Server. DHCP Relay And DHCP Snooping

NAT And Its Types and The Purpose Of NAT

Fault Tolerance To A Router By Configuring HSRP

How To Make The Router As A Firewall By Creating Access Lists.

What Is A Private Network VS A Public Network.

What is STP /RSTP (Preventing Network Loops)

How To Secure The Switch Using Port Security

What Are VLANS / InterVLAN Routing And VTP.

Channel Groups Using LACP/PAGP (Fault Tolerance For Cables).

What Is A Broadcast and Collision Domain.

How To Configure Static Routing / Floating Routes/ Default Routes.

What Is Dynamic Routing And How Its Applied Step By Step

When To Use More Than One Routing Protocol (RIP,EIGRP,OSPF).

What Is The Administrative Distance And Its Role On Choosing The Routing Protocol.

Requirements

Basic Computer/Network Skills

Description

Overview

Section 1: Introduction To The Course.

Lecture 1 Introduction To Cisco Routers And Switches.

Section 2: Setup Your Environment For Cisco Routers Lab (Cisco Packet Tracer).

Lecture 2 Download And Install Cisco Packet Tracer.

Section 3: Routers And Switches Broadcast/Collision Domains And Cable Types.

Lecture 3 What Is The Purpose Of A Router And Switch.

Lecture 4 What Type Of Cables Are Out There.

Lecture 5 What Is The Difference Between A Broadcast And Collision Domain.

Lecture 6 What is A Multi Layer Switch (MLS)

Lecture 7 HUBS vs Switches

Section 4: TCP/IP Addressing And Ports.

Lecture 10 Class C

Lecture 11 Class B

Lecture 12 Class A

Lecture 13 Classes D And E

Lecture 17 Routers Mode (User,Privilage,GlobalConfig,Interface,Subinterface and Line).

Lecture 18 Difference Between The Enable Password and Enable Secret And How To Set Them Up

Lecture 19 Change The Hostname and Change Date, Time and The Time Zone.

Lecture 20 Change The History Size and Display The History.

Lecture 21 Storage Types Of The Router.(RAM,NVRAM,FLASH).

Lecture 22 Hostname, Enable Secret, Date Time, History Size And Disable IP Domain Lookup

Lecture 23 Interface Config (Duplex,Speed,Description,Display And Shut Down Ports).

Lecture 24 The MAC Address Table

Lecture 25 Storage Types Of The Switch.(RAM,NVRAM,FLASH)

Lecture 26 Interface Config (IP Address,Description,Duplex,Speed)

Lecture 27 Setup A Time Server (NTP).

Lecture 28 Disable IP Domain Lookup, Name Server, Domain Name.

Lecture 29 Configure The Console Line (Direct Connection).

Lecture 30 Configure The VTY Line (Remote Connection Telnet)

Lecture 31 Configure Usernames For Console and Telnet.

Lecture 32 How To Encrypt The Passwords.

Lecture 33 Configure The VTY Line (Remote Connection SSH)

Lecture 34 Setup A Banner For The Router.

Lecture 35 Configure The Console Line (Direct Connection).

Lecture 36 Configure The VTY Line (Remote Connection Telnet)

Lecture 37 Configure Usernames For Console and Telnet.

Lecture 38 Configure The VTY Line (Remote Connection SSH)

Lecture 39 Setup A Banner For The Switch.

Section 10: What Is TACACS+,RADIUS (AAA Centralized Server) For Routers And Switches.

Lecture 40 TACACS+ Configuration.

Lecture 41 Backup The Router And The Switch Config and IOS To A TFTP Server.

Lecture 42 Restore The Router And The Switch Config From TFTP Server.

Lecture 43 Breaking Into The Router And The Switch.

Section 12: CDP And LLDP (How To Discover Who Are Your Neighbors).

Lecture 44 Configure CDP and LLDP.

Section 13: TCP/IP Subnetting (Classless Networks)

Lecture 47 Reverse Engineer A Class C Subnet

Lecture 50 Reverse Engineer A Class B Subnet

Lecture 53 Reverse Engineer A Class A Subnet

Section 14: Securing Switch Ports Using Port Security.

Lecture 54 Switch Ports Without Port Security

Lecture 59 Switch Ports MAC Address Table

Section 15: Segmenting The Network Using VLANs.

Lecture 60 Switches Without VLANS.

Section 16: Routing Between Different VLANs. (Inter Vlan Routing).

Section 17: VTP And Its Relation To VLANs.

Section 18: Preventing Switch Loops Using STP/RSTP.

Lecture 73 STP

Lecture 74 RSTP

Section 19: Fault Tolerance For Cables (EtherChannel) Using LACP/PAGP.

Lecture 75 LACP

Lecture 76 PAGP

Section 20: Static, Default And Floating Routes.

Lecture 77 Working With One Router (Default Routing).

Lecture 78 Two Routers (Static Routing). (2 Sites For Same Company).

Lecture 79 Three Routers (Static /Default). (3 Sites For Same Company).

Section 21: Dynamic Routing (RIP,OSPF,EIGRP).

Lecture 82 Setting UP RIPV1

Lecture 83 Setting UP RIPV2

Lecture 84 Setting UP OSPF Lab1

Lecture 85 Setting UP OSPF Lab2

Lecture 86 Setting UP OSPF Lab3

Lecture 87 Setting UP OSPF Lab4

Lecture 88 Setting UP OSPF Lab5

Lecture 89 Setting UP OSPF Lab6

Lecture 90 Setting UP OSPF Lab7

Lecture 91 Setting UP EIGRP Lab1.

Lecture 92 Setting UP EIGRP Lab2

Lecture 93 Setting UP EIGRP Lab3

Section 22: DHCP

Lecture 94 Setup DHCP On A Router For One Broadcast (One Network).

Lecture 95 Setup DHCP On A Router For Two Broadcast (Two Networks).

Lecture 96 Setup A DHCP Relay And What Its Purpose.

Lecture 97 Setup DHCP On One Server.

Lecture 98 Setup DHCP On Multiple Servers.

Lecture 99 What Is DHCP Snooping And How Does It Work.

Lecture 100 Setup DHCP For Multiple VLANs.

Section 23: Fault Tolerance For The Router (HSRP,VRRP,GLBP).

Lecture 101 A Typical Topology Without Fault Tolerance. (One Router).

Lecture 102 A Topology With Fault Tolerance (Two Routers).

Section 24: Making Your Router As A Firewall (Access Lists)

Lecture 105 Access List Types (Standard,Extended,Named) And The Rules.

Lecture 114 Named Access List

Section 25: NAT (Static NAT, Dynamic NAT,PAT).

Lecture 115 What Is a Public And Private Network.

Lecture 116 Static NAT

Lecture 117 Dynamic NAT

Lecture 118 PAT

Section 26: Securing WIFI Networks

Lecture 119 Setting A WIFI Network For SOHO

Lecture 120 Setting A WIFI Network For Enterprise

Section 27: Final Thoughts

Lecture 121 In A NutShell

Network Engineer/Admin,IT Support Specialist,Help Desk Tech,Any One Who Wants To Enter The Cisco World

Importantissimo!

Per NON SBAGLIARE link e finire su qualche possibile clone, approfittare di offerte esclusive personalizzate per il nostro sito, e se gradisce questo articolo ed il nostro lavoro, la preghiamo di supportarci rinnovando o sottoscrivendo un Account Premium su FILESTORE cliccando sul link qui sotto:

FileStore

Share This Post!

Torna in cima